Car Nissan Cabstar Single Cab board 2-door 3.0 TD MT MWB (150 hp)
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Make | Nissan |
| Model | Cabstar |
| Generation | 3 generation 2008-2017 years |
| Serie | Single Cab board 2-door |
| Trim | 3.0 TD MT MWB (150 hp) |
Bodywork:
| Number of seater | 2 |
| Capacity | 1660 kg |
| Full weight | 3500 kg |
| Rear track/Front track | 1569 / 1492 mm |
| Wheelbase | 2900 mm |
| Front/Rear axle load | 1750 / 2200 kg |
| Width | 1870 mm |
| Length | 5446 mm |
| Height | 2135 mm |
| Curb weight | 1840 kg |
| Permitted road-train weight | 7000 kg |
Gearbox and Handling:
| Gearbox type | Manual |
| Drive wheels | Rear wheel drive |
| Turning circle | 11.88 m |
| Number of gear | 5 |
Brakes:
| Front brakes | Disc, ventilated |
| Rear brakes | Disc, ventilated |
Suspension:
| Front suspension | Independent, Stabilizer bar, Wishbone, Double wishbone, Spring, Dampers |
| Rear suspension | Dependent, Stabilizer bar, Dampers, Reinforced parabolic springs |
Operating characteristics:
| Fuel | Disel |
| Fuel tank capacity | 90 litre |
| Emission standards | EURO III |
| Max speed | 136 km/h |
| Mixed driving fuel consumption per 100 km | 12.5 litre |
Engine:
| Engine type | Disel |
| Engine capacity | 2953 cm3 |
| Engine power | 150 hp |
| Boost type | Turbo |
| Presence of intercooler | exists |
| Turnover of maximum torque | 2000 RPM |
| Stroke cycle | 102 mm |
| Number of cylinders | 4 |
| Valves per cylinder | 4 |
| Cylinder bore | 96 mm |
| Cylinder layout | Inline |
| Injection type | Common rail |
| Maximum torque | 350 N*m |
| Max power at RPM | 3400 RPM |
Automobile Nissan Cabstar Single Cab board 2-door 3.0 TD MT MWB (150 hp) (3 generation 2008-2017)
Do you like this site or this page? Please share it. Thank you!
language
Car Configurator, Car Selection © 2023-2024 autoglasi.info
autoglasi.info